View CD750L2SOPTION60_7807783.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 1 o f 12 qc 88000-c001: 2007 iecq-cecc qc 88000-c003 component issue 4 specification march 2007 component specification for ceramic hermetically sealed high gain optocouplers up-to-date lists and bibliographical references of ieqc-cecc publications may be downloaded from www.iecq.org further copies of this document may be obtained fro m: iec international electrotechnical commission commission electrotechnique internationale box 131, rue de varemb, ch 1211 geneva 20, switzer land
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 2 o f 12 qc 88000-c001: 2007 foreword the iecq quality assessment system for electronic c omponents (iecq) is composed of those member countr ies of the international electrotechnical commission (iec) who wish to take part in a harmonized system for e lectronic components of assessed quality. iecq is also known in some european member countries as iecq-cecc. the object of the system is to facilitate internati onal trade by the harmonization of the specificatio ns and quality assessment procedures for electronic components, an d by the grant of an internationally recognised mar k, or certificate of conformity. the components produced or services provided under the system are thereby acceptable in all member countries without further testing. this component specification is based upon the requ irements of iec publication qc 001002-2, and has be en prepared by: isocom ltd hutton close crowther industrial estate washington tyne and wear ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 and published under the authority of: bsi product services maylands avenue hemel hempstead hertfordshire hp2 4sq united kingdom amendment record issue 1 ? changed pages 4, 9 & 10 ? amendments 25/0 6/10 issue 2 ? changed pages 3, 4 & 5 ? amendments 05/07 /10 issue 3 ? changed pages 3, 4, 5 & 6 ? rohs complian t, added csm160/161/162-2 & amendments 13/07/10 requirements the requirements for iecq-cecc component specificat ions as detailed in qc 001002-2 amendment 1 clause 5.4 are satisfied by the following data sheet. it should note that iecq-cecc are not responsible f or manufacturers declarations made in data sheets w hich fall outside the limits of approved detailed in iecq-cec c certificates. this component specification is intended for use wi th applicable iecq-cecc assessment specifications. eg: qc 88000-a0001
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 3 o f 12 qc 88000-c001: 2007 ceramic hermetically sealed high gain optocouplers 6n140a cs5700 cd750 csm141/a cd5731 csm160/161/162-2 ch370 csm160/161/162-4 cs700 csm1700 features applications ? release to iecq-cecc ? military, high reliability system ? hermetically sealed ? medical instruments ? high density packaging ? mos, cmos applications ? 1500v dc withstand test voltage ? logic interfacing ? low input requirements: 0.5ma ? data transmission ? high current transfer ratio: 1000% typical ? transportation ? rohs compliant description each channel contains a light emitting diode which is optically coupled to an integrated high gain photon detector. the high gain output stage featur es an open collector output providing both lower saturation voltage and higher signalling speed than a conventional photo-darlington optocoupler. the supply voltage can be operated as low as 2.0v w ithout adversely affecting the parametric performance. the high current transfer ratio of th e optocouplers makes them ideal for low input current, min 0.5ma, applications. the radiation immunity of the optocouplers compared to conventional photo transistor optocouplers is due to the shallow depth and small junctions off ered by the ic process. the optocoupler family is also available in various package styles including 6, 8 and 16 pin dip through hole, 16 pin surface mount dip flat pack an d a 6 pin leadless ceramic chip carrier. the devices can be purchased with lead bend and plating options. isocom optocouplers are offered on the basis of sim ilarity of emitter and detector therefore the performance characterization is identical, subject to the limitations of the packages. the wafer die similarities apply to the optocouplers for high rel iability screening and radiation testing.
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 4 o f 12 qc 88000-c001: 2007 selection guide package styles and configuration op tions package 5 pin hybrid 6 pad lcc 8 pin dip 8 pin dip 16 pin dip 16 pin flat pack lead style channels 1 1 1 2 4 2/4 common channel wiring isocom part numbers and options commercial ch370 csm141a csm1700 cs5700 cs700 cd750 cd5731 6n140a csm160/161/ 162 defense level ch370/l2 csm141a/l2 csm1700/l2 cs5700/l2 cs700/l2 cd750/l2 cd5731/l2 6n140a/l2 csm160/161/ 162/l2 space level ch370/l2s csm141a/l2s csm1700/l2s cs5700/l2s cs700/l2s cd750/l2s cd5731/l2s 6n140a/l2s csm160/161/ 162/l2s standard gold plate finish gold plate gold plate gold plate gold plate gold plate solder dipped option 20 option 20 option 20 butt cut/gold plate option 10 option 10 option 10 gull wing/soldered option 30 option 30 option 30 crew cut/gold plate option 60 option 60 option 60 functional diagrams ch370 csm141a cs5700 cs700 cd750 cd5731 6n140a csm160/161 /162-2 5 pin hybrid 6 pad lcc 8 pin dip 8 pin dip 16 pin d ip 16 pin flat pack 1 channel 1 channel 1 channel 2 channel 4 channel 2 channel 61 2 3 4 5 csm1700 csm160/161 /162-4 6 pad lcc 16 pin flat pack 1 channel 4 channel
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 5 o f 12 qc 88000-c001: 2007 outline drawings 16 pin dip, 4 channel 16 pin flat pack, 2 and 4 channel note: dimensions in millimeters 8 pin dip 1 and 2 channel
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 6 o f 12 qc 88000-c001: 2007 6 terminal lcc surface mount, 1 channel 4.318 csm141a 6.223 5 4 3 2 1.651 0.635 1 6 2.286 r = .2286 1.27 2.54 1.67 0.762 0.635 device marking xxxxxxx isocom xxxx isocom part number manufacturer date code (xx year xx week)
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 7 o f 12 qc 88000-c001: 2007 hermetic optocoupler options option description 10 surface mountable hermetic optocoupler with leads t rimmed for butt joint assembly. this option is available on commercial hi-rel product in 8 and 16 pin dip 20 30 surface mountable hermetic optocoupler with leads c ut and bent for gull wing assembly. this option is available on commercial and hi-rel product in 8 and 16 pin dip. 60 surface mountable hermetic optocoupler with leads t rimmed for butt joint assembly. this option is available on commercial hi-rel product in 8 and 16 pin dip
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 8 o f 12 qc 88000-c001: 2007 absolute maximum ratings storage temperature -65c to +150c operating temperature -55c to +125c lead soldering temperature 260c for 10s, 1.6mm belo w seating plane where appropriate input diode peak forward current 20ma 1 ms duration, 500pps average forward current 10ma (see note 3) reverse voltage 5v power dissipation 35mw output detector supply voltage -0.5 to 20v v cc (see note 1) current 40ma i o collector power dissipation 50mw (see note 2) voltage -0.5 to 20v v o (see note 1) single channel schematic
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 9 o f 12 qc 88000-c001: 2007 electrical characteristics t a = -55c to +125c u.o.s. all typical values at v cc = 5v, t a = 25c (each channel where appropriate). parameter symbol test conditions device min type ma x units high level output current (see notes 4 & 6) i oh i ohx i f = 2a, v o = v cc = 5.5v - 0.001 250 a i f = 0.5ma, i ol = 1.5ma, v cc = 4.5v - 0.1 0.4 lower level output voltage (see note 4) v ol i f = 5ma, i ol = 10ma, v cc = 4.5v - 0.15 0.4 v v cc = 18v, i f1 = i f2 = i f3 = i f4 = 0 40 high level supply current i cch v cc = 5.5, i f1 = i f2 = i f3 = i f4 = 0 csm160/1 - 0.1 60 a v cc = 18v, i f1 = i f2 = i f3 = i f4 = 1.6ma - 1.4 4 low level supply current (see note 4) i ccl v cc = 5.5v, i f1 = i f2 = i f3 = i f4 = 4ma csm160/1 8 ma input-output insulation leakage current (see notes 7 & 13) i i-o rh = 45%, t a = 25c, t = 5s v io = 1500vdc - - 1.0 a i f = 1.6ma, t a = 25c input forward voltage (see note 4) v f i f = 4.0ma csm160/1 - 1.45 1.9 v input reverse breakdown voltage (see note 4) b vr i r = 10a, t a = 25c 5 - - v 6n140 cs5700 csm6730 ch370 cd750 csm1700 - 8 60 r l = 4.7k , v cc = 5v, i f = 0.5ma, t a = 25c csm160/1 100 6n140 - 8 20 cs5700 csm6730 30 propagation delay time to logic high output (see note 4) t plh r l = 680 , v cc = 5v, i f = 5ma, t a = 25c ch390 cd750 csm1700 60 s ch370 cd750 csm1700 - 35 100 rl = 4.7k , vcc = 5v, if = 0.5ma, ta = 25c csm160 csm161 cs5700 csm6730 100 ch390 cd750 csm1700 - 3 12 cs5700 csm6730 10 propagation delay time to logic low output (see note 4) tphl rl = 680 , vcc = 5v, if = 5ma, ta = 25c csm160/1 5 s if = 0.5ma, vo = 0.4v, vcc = 4.5v 300 700 - if = 1.6ma, vo = 0.4v, vcc = 4.5v 200 1000 - current transfer ratio (see notes 4 & 5) ctr if = 5ma, vo = 0.4v, vcc = 4.5v 200 600 - %
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 10 of 12 qc 88000-c001: 2007 electrical characteristics (continued) v cc = 5v, t a = 25c, v cm = 50v p-p r l = 1.5k , i f = 0ma common mode transient immunity at logical high output level (see notes 4, 10 & 12) cm h r l = 2.2k , i f = 0ma ch370 cs700 csm1700 csm6730 500 1000 - v/s v cc = 5v, t a = 25c, v cm = 50v p-p r l = 1.5k , i f = 1.6ma common mode transient immunity at logical low output level (see notes 4, 10 & 12) cm l r l = 2.2k , i f = 1.6ma ch370 cs700 csm1700 csm6730 500 -1000 - v/s typical characteristics t a = 25c parameter symbol test conditions notes min type max units resistance r io v 10 = 500vdc 4 & 8 - 10 12 - capacitance c io f = 1mhz 4 & 8 - 1.5 - pf input capacitance c in f = 1mhz, v f = 0 4 - 60 - pf temperature coefficient of forward voltage ? vf ? ta i f = 1.6ma 1 - -1.8 - mv/ c input-input insulation leakage current i i-i 45% relative humidity v ii = 500vdc, t = 5s 9 - 0.6 - na resistance r i-i v ii = 500vdc 9 - 10 12 - capacitance c i-i f = 1mhz 9 - 1 - pf notes : 1. the ground pin should be the most negative volta ge at the detector side. keeping v cc as low as possible, but greater than 2.0v, will provide lowest total i oh over temperature. 2. output power is collector output plus one fourth of total supply power. derate at 1.66mw/c above 1 10c. 3. derate i f at 0.33ma/c above 110c. 4. each channel. 5. current transfer ratio is defined as the ratio o f output collector current, i o , to the forward led input current, i f , times 100%. 6. i ohx is the leakage current resulting from channel to c hannel optical crosstalk. i f = 2a for channel under test. for all other channels, i f = 10ma. 7. input pins are shorted together, and output pins are shorted together. 8. measured between the led anode and cathode short ed together and pins at output shorted together. 9. measured between adjacent input pairs shorted to gether. 10. cm h is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (i.e., v o > 2.0v). 11. cm l is the maximum tolerable common mode transient to assure that the output will remain in the logic low state (i.e., v o < 0.8v). 12. in applications where dv/dt may exceed 50,000v/ s (such as a static discharge), a series resistor, r cc , should be included to protect the detector ic?s from destruct ively high surge currents. the recommended value is r cc = 1v k 0.6i f (ma) 13. this is a momentary withstand test, not an oper ating condition.
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 11 of 12 qc 88000-c001: 2007 electrical characteristics
isocom ? ltd for sales enquiries, or further information, please contact our sales office at: isocom ltd, hutton close, crowther industrial estat e, district 3, washington, ne38 0ah tel: +44 0191 4166 546 fax: +44 0191 4155 055 ?2007 copyright reserved to isocom limited page 12 of 12 qc 88000-c001: 2007

▲Up To Search▲

Price & Availability of CD750L2SOPTION60

	To Download CD750L2SOPTION60 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .